This Status End Segment Router is capable of running at nearly double the speed of a standard finger bit.
Features and benefits:
£101.00
In Stock
£101.00
Key applications: For stone countertop cut-outs such as sinks and hobs – primarily granite and engineered stone. Features reinforced end segment that is perfect for plunge cuts and rebating
Suitable for use on the following stone types: Granite and engineered stone. Can also cut almost any stone type with exceptional speed.
Additional information: To preserve the life of this finger bit and to allow you to benefit from the maximum speeds it has to offer, we recommend a water volume of 5 gallons per minute coming through the spindle.
Feed rate and RPM can vary depending on make of machine, water supply, material, operator and factory set up. If the RPM is engraved on the tool, it is the maximum RPM from the manufacturer, as the tool is legally required to show. We do not recommend running your tools at this RPM. The Feed Rate and RPM displayed on our website are recommended settings for optimal performance, as advised by our technical experts. You will need to adjust the Feed Rate and RPM to suit your specific individual setup to ensure safe and effective use, and best performance. If you are unsure on what these should be, please contact our technical team on [email protected] or you can arrange training at our Innovation Hub.
No data sheets available.
