Nicolai Z45 20mm ½” Gas Profile Wheels
For feeds and speeds see table below
From: £148.00
£233.00
£233.00
£233.00
£233.00
£148.00
£148.00
| Code | Position | Type | RPM | Feed | Distance |
| DFG34051 | 1 | Metal Body
Metal Bond |
6000 | 800-1000
mm/min |
To Profile |
| DFG34053 | 3 | Metal Body
Metal Bond |
6000 | 800-1000
mm/min |
0.25mm |
| DFG34054 | 4 | Metal Body
Metal Bond |
6000 | 800-1000
mm/min |
0.20mm |
| DFG34055 | 5 | Metal Body
Metal Bond |
6000 | 800-1000
mm/min |
0.10mm |
| CSLZ459991G206 | 6 | Rubber Body
Resin Bond |
2800 | 600
mm/min |
0.00-0.05mm |
| CSLZ459991G207 | 7 | Rubber Body
Resin Bond |
2800 | 600
mm/min |
0.00-0.05mm |
| CSLZ459991G208 | 8 | Rubber Body
Resin Bond |
2800 | 600
mm/min |
0.00-0.05mm |
Feed rate and RPM can vary depending on make of machine, water supply, material, operator and factory set up. If the RPM is engraved on the tool, it is the maximum RPM from the manufacturer, as the tool is legally required to show. We do not recommend running your tools at this RPM. The Feed Rate and RPM displayed on our website are recommended settings for optimal performance, as advised by our technical experts. You will need to adjust the Feed Rate and RPM to suit your specific individual setup to ensure safe and effective use, and best performance. If you are unsure on what these should be, please contact our technical team on [email protected] or you can arrange training at our Innovation Hub.
No data sheets available.
