Vacuum Brazed routers with central water feed for use on CNC machines.
Suitable for cutting marble, micromarble, limestone, slate and other soft stones.
Also can be used as a ‘clean-up’ router after the inital pass with a sintered router on bowl cut outs of granite and engineered stone too.
All Routers are 30 Grit apart from the 15.87.163-60 which is 60 Grit.
All Routers come with diamond braze on the bottom of the router so rebating can be performed .
All Routers come with a right hand 1/2″ Gas thread.
From: £56.65
£66.34
£56.65
£61.80
£61.80
£174.00
£66.95
£237.00
Feed rate and RPM can vary depending on make of machine, water supply, material, operator and factory set up. If the RPM is engraved on the tool, it is the maximum RPM from the manufacturer, as the tool is legally required to show. We do not recommend running your tools at this RPM. The Feed Rate and RPM displayed on our website are recommended settings for optimal performance, as advised by our technical experts. You will need to adjust the Feed Rate and RPM to suit your specific individual setup to ensure safe and effective use, and best performance. If you are unsure on what these should be, please contact our technical team on [email protected] or you can arrange training at our Innovation Hub.
No technical downloads available.
