Nylon Body Milling Wheel for milling stone and reducing slab thickness or backsplashes from 30mm – 20mm.
Features and benefits:
From: £526.00
£716.00
£526.00
Key applications: Milling of stone – primarily granite, engineered stone, and marble – for reducing slab thickness or backsplashes.
Suitable for use on the following stone types: Granite, engineered stone, and marble.
Additional information: Mill in 5mm depth increments at a time and always mill the full width of the wheel to stop uneven wear on the teeth.
Feed rate and RPM can vary depending on make of machine, water supply, material, operator and factory set up. If the RPM is engraved on the tool, it is the maximum RPM from the manufacturer, as the tool is legally required to show. We do not recommend running your tools at this RPM. The Feed Rate and RPM displayed on our website are recommended settings for optimal performance, as advised by our technical experts. You will need to adjust the Feed Rate and RPM to suit your specific individual setup to ensure safe and effective use, and best performance. If you are unsure on what these should be, please contact our technical team on technical@stonegatetooling.co.uk or you can arrange training at our Innovation Hub.
No technical downloads available.
