For creating H Profile (Dupont) shape on marble, engineered stone or granite.
Use on an angle grinder, running the tool into the stone until the bearings dont allow you to cut any further. These bearings act as the guide keeping the profile shape perfect.
For engineered stone and granite use Segmented as pos 1 then follow through with a vacuum brazed as pos 2 for smoothing.
For marble and limestone start with vacuum brazed tool.
From: £237.00
£358.00
Feed rate and RPM can vary depending on make of machine, water supply, material, operator and factory set up. If the RPM is engraved on the tool, it is the maximum RPM from the manufacturer, as the tool is legally required to show. We do not recommend running your tools at this RPM. The Feed Rate and RPM displayed on our website are recommended settings for optimal performance, as advised by our technical experts. You will need to adjust the Feed Rate and RPM to suit your specific individual setup to ensure safe and effective use, and best performance. If you are unsure on what these should be, please contact our technical team on [email protected] or you can arrange training at our Innovation Hub.
No data sheets available.
